View CSA7154_250754.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Communications Signal Analyzers
CSA7404B
Features & Benefits
Real-time Oscilloscope Platform with Up to 4 GHz True Analog Bandwidth and Down to 72 ps Rise Time (20% to 80%) >400,000 wfms/s Waveform Capture Rate, Powered by Exclusive DPX(R) Acquisition Technology 20 GS/s Maximum Real-time Sample Rate Built-in Compliance Mask Tests with Up to 2.5 Gb/s Optical and Electrical Serial Data Stream Rates Integrated Optical Reference Receiver Protects Integrity of System Calibration Integrated Hardware Clock Recovery Provides Singleconnection Convenience Up to 64 MB Record Length with MultiView ZoomTM for Quick Navigation of Long Records 64-Bit Serial Trigger for Isolation of Patterndependent Effects Complete Eye Pattern Measurements Suite Including Extinction Ratio, Q-factor, Eye Height/Width, Jitter and Noise Waveform Database Acquisition Technology for Accurate Parametric Measurements on Eye Patterns TekConnect(R) Interface for High Fidelity Connection OpenChoice(R) with Windows 2000 Delivers Built-in Networking and Analysis
Versatile, High-performance Real-time Digital Oscilloscopes Dedicated to Rapid Design Analysis and Verification of Communications Signals Up To 2.5 Gb/s Rates (OC-48/STM-16 or Fibre Channel FC2125) The CSA7404B reduces product development time by providing one tool that spans circuit development and physical layer testing. With this family, engineers can test designs for compliance to network communications standards as well as analyze critical internal parameters such as signal integrity, timing margins and jitter. The CSA7404B has a 4 GHz true analog bandwidth, 20 GS/s maximum real-time sample rate, and more than 400,000 wfms/s waveform capture rate, enabled by exclusive DPX(R) acquisition technology, to rapidly acquire electrical and optical signal information not revealed with other analysis tools. Integrated broad wavelength optical response, clock recovery, serial pattern triggering, and mask testing make testing faster, easier, and more efficient. Innovative software solutions deliver domain expertise for advanced analysis and compliance testing, while the OpenChoice(R) architecture enables users to integrate their expertise through the ability to easily write custom programs or utilize popular commercial software. Instrument operation is familiar and intuitive through direct controls and a graphical user interface. This unique combination of superior measurement fidelity, unrivaled analysis and uncompromised usability speeds the development of network communications circuit designs.
Applications
Design Development and Compliance Testing of Optical and Electrical Signals to 2.5 Gb/s Rates Physical Layer Characterization of Communication Signals in Backplane, Midplane and Embedded Designs Optical and Electrical Signal Integrity, Margin Verification, Jitter and Timing Analysis
1
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Characteristics
Ve r t i c a l S y s t e m
CSA7404B
Input Channels Hardware Analog Bandwidth (-3 dB) Rise Time, 10% to 90% (Typical) Rise Time, 20% to 80% (Typical) Input Coupling Input Impedance Input Sensitivity Vertical Resolution Max. Input Voltage Offset Range DC Gain Accuracy 4 mV/div to 1 V/div
*1
4*1 4 GHz 100 ps 72 ps DC, GND 50 2 mV/div to 1 V/div 8 bits, (>11 bits with averaging) <1 VRMS for <100 mV/div, <5 VRMS for 100 mV/div settings. Also determined by TekConnect(R) accessory 2 mV to 50 mV/div 0.5 V, 50.5 mV to 99.5 mV 0.25 V 100 mV to 500 mV 5 V, 505 mV to 1 V/div 2.5 V (2% + (2% x net offset/10)) net offset = voltage level at center screen (vertically)
At 10 mV/div.
Optoelectronic System Specifications assume use of the included 013-0327-00 O-to-E Output to CH1 interconnect (unless otherwise noted).
CSA7404B
Optical Channel Unfiltered Bandwidth Input Connector Wavelength Range Calibrated Wavelengths O/E Gain
2.4 GHz Rifocs universal connector 700 nm to 1650 nm 780 nm, 850 nm, 1310 nm, 1550 nm 0.27 V/mW (0.35 V/mW typical) at 780 nm 20 nm 0.33 V/mW (0.40 V/mW typical) at 850 nm 20 nm 0.64 V/mW (0.75 V/mW typical) at 1310 nm 20 nm 0.64 V/mW (0.75 V/mW typical) at 1550 nm 20 nm 40 Wp-p at 1310 nm and 1550 nm. 20 W (-17 dBm) average power assuming 50% average duty cycle. 80 Wp-p at 780 nm and 850 nm. 40 W (-14 dBm) average power assuming 50% average duty cycle. 1.1 W + (6.5% of W/div setting) at 1310 nm and 1550 nm. 2.1 W + (6.5% of W/div setting) at 850 nm. 2.6 W + (6.5% of W/div setting) at 780 nm. 10 W/div to 500 W/div Optical reference receiver typically available over the following range: 40 W (-14 dBm) to 400 W (-4 dBm) at wavelength <1200 nm; 25 W (-16 dBm) to 250 W (-6 dBm) at wavelength >1200 nm 5 mW average; 10 mW peak at wavelength with highest relative responsivity <170 W average input (340 W peak) at 850 nm <120 W average input (240 W pk) at 1310 and 1550 nm 62.5 m core multimode fiber With 50 m or 62.5 m core multimode fiber (CPC6) attached: >14 dB for 780 nm 20 nm >14 dB for 850 nm 20 nm With 9 m core single mode fiber (SMF-28) attached: >28 dB for 1310 nm 20 nm >28 dB for 1550 nm 20 nm
Sensitivity (smallest average power for mask test) Assumes scale factor is set to minimum W/div settings and signal is at least 4 divisionsp-p RMS Noise
Input Range
Absolute Maximum Nondestructive Optical Input Maximum Nonsaturating Linear Response to Transient Input (Typical) Fiber Input Input Return Loss (Typical)
2
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Optical Reference Receiver System Fourth-order Bessel-Thompson filter response at the following rates:
CSA7404B
SONET/SDH
OC-1/STM0 (51.84 Mb/s) OC-3/STM1 (155.52 Mb/s) OC-12/STM4 (622.08 Mb/s) OC-48/STM16 (2488.3 Mb/s) OC-48 FEC (2.666 Gb/s) 1000Base SX (1.25 Gb/s) 1000Base LX (1.25 Gb/s) FC133 (132.7 Mb/s) FC266 (265.6 Mb/s) FC531 (531.2 Mb/s) FC1063 (1063.5 Mb/s) FC2125 (2127 Mb/s) S400 (491.5 Mb/s) S800 (983.04 Mb/s) S1600 (1.9661 Gb/s) 2.5 Gb/s (2127 Mb/s) 1.24416 Gb/s
Gigabit Ethernet Fibre Channel
IEEE 1394b
InfiniBand VSR
Clock Recovery System
CSA7404B
Clock Recovery Phase Locked Loop Bandwidth Tracking/Acquisition Range Clock Recovery Jitter (Typical) Input Sensitivity for Clock Recovery Input Data Rates
Fbaud/1600 typical 2% of requested baud <0.2% bit period +5 psRMS for PRBS data pattern or 4 psRMS for repeating "011" data patterns 1 division pk-pk displayed signal 1.5 Mbaud to 3.125 Gbaud
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
3
Communications Signal Analyzers
CSA7404B
C o m m u n i c a t i o n s M a s k Te s t i n g
CSA7404B
SONET/SDH GR 253-CORE (Issue 39/21/2000)
OC-1/STM0 OC-3/STM1 OC-12/STM4 OC-48/STM16 OC-48 FEC (2.666 Gb/s) DS1 Rate, DS2 Rate Sym Pair, DS2 Rate Coax, DS3 Rate E1 Sym Pair, E1 Coax, E2, E3, E4 Binary 0, E4 Binary 1 32 Mb, 97 Mb STM 1E 0/Bin 0, STM 1E 1/Bin 1 DS1, DS1A, DS1C, DS2, DS3, DS4NA, DS4NA Max Output STS-1 Pulse, STS-1 Eye STS-3, STS-3 Max Output 100Base-T STP, 100Base-T UTP 1000Base-SX Short Wave Optical 1000Base-LX Long Wave Optical 1000Base-CX FC133, FC266, FC531, FC1063, FC1063 Draft Rev 11 FC2125 Draft Rev 11 FC133E, FC266E, FC531E, FC1063E, FC1063E Normalized Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Transmit FC1063E Absolute Beta, Delta, Gamma Receive, FC2125E Normalized Beta, Delta, Gamma Transmit FC2125E Absolute Beta, Delta, Gamma Transmit FC2125E Absolute Beta, Delta, Gamma Receive FS (12 Mb/s) HS: T1, T2, T3, T4, T5, T4 (480 Mb/s) 2.5 Gb/s Optical, 2.5 Gb/s Electrical S400 Optical S400b T1, S400b T2 S800 Optical S800b T1, S800b T2 S1600 Optical S1600b T1, S1600b T2 G1 Rx (5 Cycle), G1 Tx (5 Cycle) +Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s +Ext Drv: 500 Mb/s, 750 Mb/s, 1 Gb/s 1.5 Gb/s, 2.0 Gb/s +Rcv: 500 Mb/s, 750 Mb/s, 1 Gb/s, 1.5 Gb/s, 2.0 Gb/s RIO Serial: 1.25 Gb/s, 2.5 Gb/s SFI-5, SPI-5 TA/TC/RB/RD Data/Clock (2.4888 Gb/s) SFI-5, SPI-5 TC Data (2.4888 Gb/s) SFI-5, SPI-5 TA Clock (2.4888 Gb/s) SFI-5, SPI-5 TC Clock (2.4888 Gb/s) SFI-5, SPI-5 Data (2.4888 Gb/s) SFI-5, SPI-5 RD Data (2.4888 Gb/s) SFI-5, SPI-5 RB Clock (2.4888 Gb/s) SFI-5, SPI-5_5 RD Clock (2.4888 Gb/s) VSR OC 192/STM64 1.24416 Gb/s TFI-5 (2.4888 Gb/s) Transmit/Receive (2.5 Gb/s)
ITU-T G.703 (10/98)
ANSI T1.102-1993 (R1999)
Ethernet IEEE Std 802.3 and ANSI X3.263-1995
Fibre Channel Optical (ANSI X3.303-1997) Fibre Channel Electrical (ANSI X3.303-1997)
USB (Rev 2.0 April 2000) InfiniBand (Draft) IEEE 1394b (Draft)
Serial ATA (Rev 1.0 June 2002) Rapid I/O LP_LVDS Rev 0.3 (draft) 5/2002
Rapid I/O Serial Rev 1.1 December, 2001 OIF Standards Draft 1.13 June 5, 2002
PCI Express Rev 1.0
4
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Ti m e b a s e S y s t e m
CSA7404B
Timebase Range Timebase Delay Time Range Channel to Channel Deskew Range Time Interval Accuracy, Single-shot Sample Mode Trigger Jitter Long Term Sample Rate and Delay Time Accuracy External Timebase Reference External Reference Input Frequency Range External Reference Input Sensitivity External Reference Maximum Input Signal Internal Reference Output Frequency
50 ps to 10 s/div 5 ns to 250 s 75 ns in 1 ps steps (0.06/sample rate + 2.5 ppm x |reading|) RMS 1.5 psRMS typical 2.5 ppm over 100 ms interval; aging <1 ppm per year from date of factory calibration Rear Panel Connection 9.8 MHz to 10.2 MHz Vin 200 mVp-p 7 Vp-p 2.5 ppm over 100 ms interval; aging <1 ppm per year from date of factory calibration Vout (Hi) 2.5 V open circuit; 1.0 V into 50 load to gnd Vout (Lo) 0.7 V into a load of 4 mA; 0.25 V into 50 load to gnd
Internal Reference Output Voltages
Acquisition System
Real-time Sample Rates CSA7404B
1 channel (Max. rate) 2 channels (Max. rate) 3-4 channels (Max. rate) Equivalent Time Sample Rate (Maximum) Maximum Record Length per Channel with Standard Memory With Memory Opt. 2M With Memory Opt. 3M With Memory Opt. 4M With Memory Opt. 5M
20 GS/s 10 GS/s 5 GS/s 1 TS/s 4 M (1 ch), 2 M (2 ch), 1 M (4 ch) 8 M (1 ch), 4 M (2 ch), 2 M (4 ch) 16 M (1 ch), 8 M (2 ch), 4 M (4 ch) 32 M (1 ch), 16 M (2 ch), 8 M (4 ch) 64 M (1 ch), 32 M (2 ch), 16 M (4 ch)
Maximum Duration at Highest Real-time Resolution (1 ch)
CSA7404B
Time Resolution (Single-shot) Maximum Duration with Standard Memory Maximum Duration with Opt. 2M Maximum Duration with Opt. 3M Maximum Duration with Opt. 4M Maximum Duration with Opt. 5M
50 ps (20 GS/s) 200 s 400 s 800 s 1.6 ms 3.2 ms
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
5
Communications Signal Analyzers
CSA7404B
Acquisition Modes
CSA7404B
FastAcq Acquisition Maximum FastAcq Waveform Capture Rate Sample Waveform Database (WfmDB) Peak Detect Minimum Peak Detect Pulse Width Average Envelope Hi-res FastFrameTM Acquisition
Powered by DPX(R) acquisition technology, FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events >400,000 wfms/sec Acquire sampled values Accumulate waveform database providing three-dimensional array of amplitude, time and counts Captures narrow glitches at all real-time sampling rates 400 ps From 2 to 10,000 waveforms included in average From 2 to 2x109 waveforms included in min-max envelope Real-time boxcar averaging reduces random noise and increases resolution Acquisition memory divided into segments; maximum trigger rate >265,000 waveforms per second. Time of arrival recorded with each event
Tr i g g e r S y s t e m
CSA7404B Sensitivity
Internal DC Coupled, Main Trigger External (Auxiliary Input) Main Trigger Modes Trigger Sequences
Trigger Level Range
0.5 div from DC to 50 MHz, 1.5 div at 3 GHz 100 mV from DC to 50 MHz increasing to 500 mV at 2.5 GHz Auto, Normal and Single Main, Delayed by Time, Delayed by Events. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time
Internal External (Auxiliary Input) Line Trigger Coupling Trigger Holdoff Modes Trigger Holdoff Range
12 divisions from center of screen 5 V fixed at 0 V DC, AC (attenuate <60 Hz), HF Rej (attenuate >30 kHz), LF Rej (attenuates <80 kHz), Noise Reject (reduce sensitivity) Random, Automatic or User-specified Time 250 ns minimum to 12 seconds maximum
6
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Trigger Modes
Edge - Positive and/or negative slope on any channel or front panel auxiliary input. Coupling includes DC, AC, noise reject, HF reject and LF reject. Comm - Support for AMI, HDB3, BnZS, CMI, MLT3 and NRZ encoded communications signals. AMI encoding: Standards include DS1, DS1A, DS1C, DS3, E1, E2, E3, STS-1 or a custom bit rate. Select between positive or negative isolated one, zero pulse form or eye patterns. HDB3 encoding: Standards include E1, E2, E3, DS1A or custom bit rate. Select between positive or negative isolated one pulse or eye pattern. BnZS encoding: Standards include DS1, DS1C, DS2, DS3, STS-1 or custom bit rate. Select between positive or negative isolated one pulse or eye pattern. CMI encoding: Standards include STS-3, STM1E, DS4NA, E4 or a custom bit rate. Select between positive or negative one pulse, zero pulse or eye pattern. MLT3 encoding: Standards include 100Base-TX. NRZ encoding: Standards include OC1/STM0, OC3/STM1, OC12/STM4, OC48/STM16, GB Ethernet, FC133, FC266, FC531, FC1063, FC2125, InfiniBand 2.5, G1 ATA, FS USB, HS USB, IEEE 1394b S400b, S800b, S1600b, OC-48 FEC, 1000 BASE CX, RapidIO, SFI-5, SPI-5, VSR, PCI-Express, TFI-5; eye patterns only. CSA7154 limited to standards 1.25 Gb/s. Serial Pattern - 64-Bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format. Trigger on NRZ-encoded data up to 1.25 Gbaud. Glitch - Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is 1.0 ns with 200 ps resolution. Minimum glitch width is 225 ps with rearm time of 250 ps.
Width - Trigger on width of positive or negative pulse (down to 225 ps) either within or out of selectable time limits: 340 ps to 1 s. Runt - Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Optional time qualification. Timeout - Trigger on an event which remains high, low, or either, for a specified time period, selectable from 340 ps to 1 s with 100 ps resolution. Transition - Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative or either. Setup/Hold - Trigger on violations of both setup time and hold time between clock and data present on any two input channels. Pattern - Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR, NAND, NOR) specified for four input channels defined as HIGH, LOW or Don't Care. State - Any logical pattern of channels (1, 2, 3) clocked by edge on channel 4. Trigger on rising or falling clock edge. Window - Trigger on an event that enters or exits a window defined by two user-adjustable thresholds. Event can be time or logic qualified. Logic Qualified Trigger applicable to Glitch, Width, Runt, Timeout, Transition, Setup/Hold, Window triggers - Trigger on the specified event only if the logic state defined with the remaining unused channels occurs. Trigger Delay by Time - Trigger Delay by Time 5 ns to 250 seconds. Trigger Delay by Events - Trigger Delay by Events 1 to 10,000,000 Events.
Waveform Measurements
Amplitude - Amplitude, High, Low, Maximum, Minimum, Peak to Peak, Mean, Cycle Mean, RMS, Cycle RMS, Positive Overshoot, Negative Overshoot. Time - Rise time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Period, Frequency, Delay. Combination - Area, Cycle Area, Phase, Burst Width. Histogram-related - Waveform count, Hits in box, Peak hits, Median, Maximum, Minimum, Peak to Peak, Mean (), Standard Deviation (), +1, +2, +3. Eye Pattern-related - Extinction Ratio (absolute, % and dB), Eye Height, Eye Top, Eye Base, Eye Width, Crossing %, Jitter (peak-peak, RMS and 6), Noise (peak-peak and RMS), S/N ratio, Cycle Distortion, Q-factor.
Waveform Processing/Math
Algebraic Expressions - Define extensive algebraic expressions including waveforms, scalars and results of parametric measurements e.g., (Integral (Ch. 1-Meas(Ch. 1))x1.414. Arithmetic - Add, subtract, multiply, divide waveforms and scalars. Relational - Boolean result of comparison >, <, , , ==, !=. Calculus - Integrate, differentiate. Frequency Domain Functions - Spectral magnitude and phase, real and imaginary spectra. Vertical Units - Magnitude: Linear, dB, dBm. Phase: degrees, radians. Window Functions - Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential. Waveform Definitions - Waveform definition as arbitrary math expressions.
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
7
Communications Signal Analyzers
CSA7404B
Display Characteristics
Input/Output Ports
Display Type - Liquid crystal active-matrix color display; integral touch screen. Display Size - 211.2 mm (W) x 158.4 mm (H), 264 mm (10.4 in.) diagonal. Display Resolution - 1024 horizontal x 768 vertical pixels. Waveform Styles - Vectors, Dots, Variable Persistence, Infinite Persistence.
Computer System and Peripherals
Probe Compensation Output - Front panel BNC connector, requires Probe Cal-Deskew Fixture (included) for probe attachment. 1 V 20% into >10 k load. 500 mV 20% into a 50 load. Recovered Clock Out - Front-panel SMA connector provides output of clock signal recovered from specified channel. Output compatible with ECL terminated with 50 to GND. Peak-to-peak output swing at 650 MHz is at least 200 mV into 50 . Higher frequencies will be further attenuated by approximately 6 dB per octave above 625 MHz. Recovered Data Out - Front-panel SMA connector provides regenerated data output from clock recovery system. Serial data output baud rate 1250 MBaud. Output swing at this baud rate will be at least 200 mV into 50 . Optical In - Optoelectronic converter input, 700 nm to 1650 nm, Rifocs connector. O/E Output - Front-panel BMA connector providing electrical output of optoelectronic converter. SMA adapter included. Analog Signal Output Amplitude - Rear-panel BNC connector, provides a buffered version of the signal that is attached to the Channel 3 input when Ch. 3 is selected as trigger source. Frequency response: 1 GHz into a 50 load. Amplitude: 20 mV/div 20% into a 1 M load, 10 mV/div 20% into a 50 load. Auxiliary Output - Rear-panel BNC connector, provides a TTL-compatible, polarity switchable pulse when the oscilloscope triggers or optionally, upon mask test failure or test completion. External Timebase Reference In - Rear-panel BNC connector, timebase system can phase-lock to external 10 MHz reference.
Timebase Reference Out - Rear-panel BNC connector, provides TTL-compatible output of internal 10 MHz reference oscillator. Parallel Port - IEEE 1284, DB-25 connector. Audio Ports - Miniature phone jacks for stereo microphone input and stereo line output. USB Port - Allows connection or disconnection of USB keyboard, mouse or other peripherals while oscilloscope power is on. Two USB ports. Keyboard Port - PS-2 compatible. Mouse Port - PS-2 compatible. LAN Port - RJ-45 connector, supports 10Base-T and 100Base-T. Serial Port - DB-9 COM1 port. Windows Video Port - 15 pin D-Sub connector on the rear panel; connect a second monitor to use dual-monitor display mode. Video is DDC2B compliant. GPIB Port - IEEE 488.2 standard. Scope Video Port - 15 pin D-sub connector on the rear panel, video is IBM XGA compatible for B models. Connect to show the oscilloscope display, including live waveforms on an external monitor or projector. The primary Windows desktop can also be displayed on an external monitor using this port.
Power Source
CPU - Intel Pentium 4 processor, 2.8 GHz*. PC System Memory - 1 GB*. Hard Disk Drive - 40 GB removable hard disk drive: rear-panel, or (B model only) front-panel (option FHD). Floppy Disk Drive - 1.44 MB 3.5-in. floppy disk drive: front-panel, or rear-panel (option FHD). CD-RW Drive - Rear-panel CD-RW drive. Mouse - Thumb wheel model included, USB interface. Keyboard - Mini-keyboard included (fits in pouch); PS-2 interface. Order 119-6633-00 for full-size keyboard; USB interface and hub.
*
Available September 2004
Power - 100 to 240 VRMS, 10%, 50/60 Hz CAT II. 115 VRMS 10%, 400 Hz CAT II. <300 Watts (450 VA).
8
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Physical Characteristics
BENCHTOP CONFIGURATION Dimensions mm Height 277 Width 455 Depth 425 Weight kg Net 19 Shipping 37 RACKMOUNT CONFIGURATION Dimensions mm Height 277 Width 502 Depth 486 Weight kg Net 20 Shipping 5.6 MECHANICAL Required Clearance mm Top 0 or >76 Bottom 0 Left side 76 Right side 76 Front 0 Rear 0
Environmental
in. 10.9 17.9 16.75 lb. 41.5 85
Humidity - Operating: 20% to 90% relative humidity with a maximum wet bulb temperature of +29 C at or below +50 C, noncondensing. Upper limit derated to 25% relative humidity at +50 C. Nonoperating: With no diskette in floppy disk drive, 5% to 90% relative humidity with a maximum wet bulb temperature of +29 C at or below +60 C, noncondensing. Upper limit derated to 20% relative humidity at +60 C. Altitude - Operating: 10,000 ft. (3,048 m). Nonoperating: 40,000 ft. (12,190 m). Random Vibration - Operating: 0.00015 g2/Hz from 5 to 350 Hz, -3 dB/octave from 350 to 500 Hz, 0.000105 g2/Hz at 500 Hz. Overall level of 0.27 gRMS. Nonoperating: 0.0175 g2/Hz from 5 to 100 Hz, -3 dB/octave from 100 to 200 Hz, 0.0875 g2/Hz from 200 to 350 Hz, -3 dB/octave from 350 to 500 Hz, 0.006132 g2/Hz at 500 Hz. Overall level of 2.28 gRMS. Electromagnetic Compatibility - EN 61326 (EU EMC Directive 89/336EEC). AS/NZS 2064 (Australian EMC Framework). Safety - UL 3111-1, CSA-22.2 No. 1010.1, EN61010-2.
Ordering Information
CSA7404B
in. 10.9 19.75 19.125 lb. 43.5 12.32
in. 0 or >3 0 3 3 0 0
4 GHz Communications Signal Analyzer. Includes: Accessory pouch, front cover, mouse, probe calibration and deskew fixture (067-0405-xx), O/E Electrical Output to Ch. 1 Input Adapter (013-0327-xx), Fiber cleaning kit (020-2494-xx), GPIB Programmer's Reference, Optional Applications Software CD-ROM, Oscilloscope Analysis and Connectivity Made Easy Kit, Performance verification procedure PDF file, NIST, MIL-STD-45662A, ISO9000 Calibration Certificate and Power Cord. CSA7404B Also Includes: (4) TekConnect(R) to SMA adapters (TCA-SMA), Quick Reference (020-2404-xx), User Manual (071-1035-xx), Option SM and ST User Manual (071-1228-xx), TDS/CSA7000B Series Product Software CD-ROM, and TDS/CSA7000B Series operating system restoration CD-ROM. Please specify power plug and disk drive option when ordering.
Temperature - Operating: 0 C or 5 C (B models) to +50 C, excluding floppy disk and CD-ROM drives. +10 C to +45 C, including floppy disk and CD-ROM drives. Nonoperating: -22 C to +60 C.
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
9
Communications Signal Analyzers
CSA7404B
Instrument Options
Power Plug Options
Recommended Accessories
Probes and Converters
Optical Connector Adapters
Opt. A0 - North America power. Opt. A1 - Universal EURO power. Opt. A2 - United Kingdom power. Opt. A3 - Australia power. Opt. A5 - Switzerland power. Opt. A6 - Japan power. Opt. A10 - China power. Opt. A99 - No power cord or AC adapter.
Mounting Options
Opt. 1K - K4000 Scope cart. Opt. 1R - Rackmount kit.
Disk Drive Options
Opt FHD - Front-panel 40 GB removable hard disk drive, replaces floppy disk drive that goes on the rear-panel.
Service Options
Opt. C3 - Calibration Service 3 Years. Opt. C5 - Calibration Service 5 Years. Opt. D1 - Calibration Data Report. Opt. D3 - Calibration Data Report 3 Years (with Option C3). Opt. D5 - Calibration Data Report 5 Years (with Option C5). Opt. R3 - Repair Service 3 Years. Opt. R5 - Repair Service 5 Years.
P7260 - 6 GHz Low Capacitance Active Voltage Probe (TekConnect). P7350 - 5 GHz Differential Probe (TekConnect). P7350SMA - 5 GHz SMA Input differential Probe. P6150 - 9 GHz Low Capacitance Passive Voltage Probe (requires TCA-SMA adapter). P6158 - 3 GHz Low Capacitance Passive Voltage Probe (requires TCA-BNC adapter). CT6 - 2 GHz AC Current Probe (requires TCA-BNC adapter). CT1 - 1 GHz AC Current Probe (requires TCA-BNC adapter). P6701B - Optical-to-Electrical Converter; 500 nm to 950 nm (requires TCA-BNC adapter). P6703B - Optical-to-Electrical Converter; 1100 nm to 1650 nm (requires TCA-BNC adapter). TCP202 - DC to 50 MHz Current Probe (requires TCA-BNC adapter). P6245 - 1.5 GHz Active Probe. P6248 - 1.7 GHz Differential Probe. P7240 - 4 GHz Active Probe. P7330 - 3.5 GHz Differential Probe.
Adapters
FC/PC - Order 119-5115-00. SC/PC - Order 119-5116-00. ST/PC - Order 119-4513-00. DIN/PC 47256 - Order 119-4546-00. Diamond 2.5 - Order 119-4556-00. Diamond 3.5 - Order 119-4558-00. SMA 2.5 - Order 119-4517-00. SMA - Order 119-4557-00.
Cables
GPIB Cable (1M) - Order 012-0991-01. GPIB Cable (2M) - Order 012-0991-00. Centronics Cable - Order 012-1214-00.
Test Fixtures
TDSUSBF - USB test fixture to be used in conjunction with Opt. USB.
Software
WSTRO- WaveStarTM waveform capture and documentation software.
Miscellaneous
TCA75 - 4 GHz precision TekConnect 75 to 50 adapter with 75 BNC input connector. TCA-SMA - TekConnect-to-SMA Adapter. TCA-BNC - TekConnect-to-BNC Adapter. TCA-N - TekConnect-to-N Adapter. TCA-1 Meg - 1 Meg amplifier, high impedance buffer 1 M/10 pF, TekProbe BNC-to-TekConnect; includes P6139A. AFTDS - Telecom differential electrical interface adapter (for line rates <8 Mb/s; requires TCA-BNC adapter). AMT75 - 1 GHz precision 75 adapter (for line rates >8 Mb/s; requires TCA-BNC adapter).
Keyboard - Full size, USB interface; Order 119-6633-00. Service Manual - Order 071-7011-xx for CSA7154, 071-1227-xx for CSA7404B. Transit Case - Order 016-1522-00.
10 Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
Communications Signal Analyzers
CSA7404B
Options (available on models indicated by "x")
CSA7404B Acquisition Memory Options
2M 3M 4M 5M
Software Options
8 Msamples max, 2 Msamples/ch 16 Msamples max, 4 Msamples/ch 32 Msamples max, 8 Msamples/ch 64 Msamples max, 16 Msamples/ch
x x x x
DVI DVD ET3 JT3 J3E J2 CP2 USB*1 PW3 RTE PCE*2 IBA*2
*1 Requires Option TDSUSBF (USB Test Fixture). *2 Requires Option RTE.
TDSDVI DVI compliance test solution TDSDVD Optical storage analysis TDSET3 Ethernet compliance test software TDSJIT3 Advanced jitter analysis software TDSJIT3 Essentials TDSDDM2 Disk drive analysis software TDSCPM2 ANSI/ITU Telecom pulse compliance testing software TDSUSBS USB2.0 Compliance test S/W only TDSPWR3 Power measurement and analysis software Serial Data Compliance and Analysis Software PCI Express Compliance Module for option RTE InfiniBand Compliance Module for option RTE
x x x x x x x x x x x x
To view instrument upgrades, please go to www.tektronix.com/csa7000b_upgrades.
Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b
11
Communications Signal Analyzers
CSA7404B
Contact Tektronix:
ASEAN / Australasia / Pakistan (65) 6356 3900 Austria +43 2236 8092 262 Belgium +32 (2) 715 89 70 Brazil & South America 55 (11) 3741-8360 Canada 1 (800) 661-5625 Central Europe & Greece +43 2236 8092 301 Denmark +45 44 850 700 Finland +358 (9) 4783 400 France & North Africa +33 (0) 1 69 86 80 34 Germany +49 (221) 94 77 400 Hong Kong (852) 2585-6688 India (91) 80-2275577 Italy +39 (02) 25086 1 Japan 81 (3) 3448-3010 Mexico, Central America & Caribbean 52 (55) 56666-333 The Netherlands +31 (0) 23 569 5555 Norway +47 22 07 07 00 People's Republic of China 86 (10) 6235 1230 Poland +48 (0) 22 521 53 40 Republic of Korea 82 (2) 528-5299 Russia, CIS & The Baltics +358 (9) 4783 400 South Africa +27 11 254 8360 Spain +34 (91) 372 6055 Sweden +46 8 477 6503/4 Taiwan 886 (2) 2722-9622 United Kingdom & Eire +44 (0) 1344 392400 USA 1 (800) 426-2200 USA (Export Sales) 1 (503) 627-1916 For other areas contact Tektronix, Inc. at: 1 (503) 627-7111 Updated 20 September 2002
Our most up-to-date product information is available at:
www.tektronix.com
Product(s) are manufactured in ISO registered facilities. Copyright (c) 2003, Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies. 07/04 HB/WOW 55W-15048-7
12 Digital Phosphor Oscilloscopes * www.tektronix.com/csa7000b

▲Up To Search▲

Price & Availability of CSA7154

	To Download CSA7154 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .